Tweetnij
Firmware Version 2.2.0 incorporates the following enhancements and fixes:
1. Improves security features. A password must be set initially.
•Adds the ability to review the history of any changes made to the password, network information, or other settings.
*For more information, please refer to the 'Setting a Password' section in the Advanced User Guide on cam.start.canon.
2. Enables firmware updates to be performed when the camera is connected to the internet and if new firmware is made available on Canon servers.
3. Adds support for the Software Development Assistance Kit (EDSDK/CCAPI).
4. Adds a function that simultaneously protects images when they are rated.
5. Adds the ability to use up to 8 TB of CFexpress cards.
Note
・ Cards larger than 8 TB require low-level formatting by the camera.
・ Cards larger than 8 TB are treated as 8 TB cards.
・ Cards larger than 2 TB cannot be used for firmware updating.
6. Adds compatibility for Peripheral Coordinated Control with RF16-28mm F2.8 IS STM lens.
・With RF16-28mm F2.8 IS STM, Peripheral Coordinated Control only applies to still photo shooting.
7. Fixes an issue in which Err70 may occur during Bluetooth communication due to interference from other Bluetooth devices.
8. Fixes an issue in which Err70 may occur when repeatedly shooting in the "High-speed continuous shooting +" mode.
9. Fixes an issue in which HDMI output may momentarily stop when [Screen Off] is activated in the Power Saving settings.
Changes in version 2.1.0:
1. Enables functions to be used without limitation in conjunction with the new Battery Pack LP-E6P.
This makes it possible to shoot at the same continuous shooting speed as when using LP-E6NH.
In-camera charging of LP-E6P is also supported.
2. Adds [Protect Images] and [Rating] during FTP Transfer.
3. The following issues have been fixed.
3-1. Fixes an issue, in which when Wi-Fi is disconnected, Err 70 occurs.
3-2. Fixes an issue, in which when shooting subjects that are smaller in the frame, the card access indicator blinks and operations can no longer be performed.
3-3. Fixes an issue, in which when performing shooting in high-speed continuous shooting + mode with the [Highlight Tone Priority] option set to [ON], focus may not be achieved when certain ISO speed settings are used.
Changes in version 2.0.0:
1. Enables servo zooming to be remotely controlled from EOS Utility or Camera Connect when Power Zoom Adapter PZ-E2/PZ-E2B is attached to a compatible lens.
2. Enables up to 2 TB to be used on CFexpress cards larger than 2 TB.
3. Fixes an issue that may cause the camera, in rare instances, to experience a delayed restart after the camera has gone into Auto Power Off.
4. Fixes an issue that, under specific circumstances, may prevent the image from being displayed in the viewfinder or on the screen causing the camera to stop operating, or Error Code 70 may be displayed.
5. Fixes minor issues.
Changes in version 1.9.0:
1. Adds the ability to erase voice memos added to images and to add voice memos to protected images.
2. Adds enhanced security when transferring images via FTPS transfer.
3. Adds support for the Software Development Assistance Kit (EDSDK/CCAPI).
4. Fixes an issue, in which, after touchscreen operation, in rare circumstances, the camera operations cannot be performed, and even if the camera is operated, [BUSY] appears on the screen.
5. Fixes minor issues.
Changes in version 1.8.1:
1. Adds [IBIS High resolution shot] to the camera menu. By utilizing the in-body IS mechanism, it is now possible to record images with higher resolution.*
*Use EOS Utility/Digital Photo Professional to check the images. EOS Utility/Digital Photo Professional will need to be upgraded.
2. Adds [Save/load comm. settings on card] to the camera menu.
Network settings can now be transferred between cameras of the same model.
3. Adds the ability for images to be cropped and resized during transfer to the FTP server.
4. Adds Protect Images During [FTP Transfer] to the camera menu. Images transferred via FTP can now be automatically protected. The user can determine if images have already been transferred via FTP.
5. Fixes minor issues.
To trochę nie w porządku z twojej strony korzystać ze starszego oprogramowania i jednocześnie narzekać.
1. Improves security features. A password must be set initially.
•Adds the ability to review the history of any changes made to the password, network information, or other settings.
*For more information, please refer to the 'Setting a Password' section in the Advanced User Guide on cam.start.canon.
2. Enables firmware updates to be performed when the camera is connected to the internet and if new firmware is made available on Canon servers.
3. Adds support for the Software Development Assistance Kit (EDSDK/CCAPI).
4. Adds a function that simultaneously protects images when they are rated.
5. Adds the ability to use up to 8 TB of CFexpress cards.
Note
・ Cards larger than 8 TB require low-level formatting by the camera.
・ Cards larger than 8 TB are treated as 8 TB cards.
・ Cards larger than 2 TB cannot be used for firmware updating.
6. Adds compatibility for Peripheral Coordinated Control with RF16-28mm F2.8 IS STM lens.
・With RF16-28mm F2.8 IS STM, Peripheral Coordinated Control only applies to still photo shooting.
7. Fixes an issue in which Err70 may occur during Bluetooth communication due to interference from other Bluetooth devices.
8. Fixes an issue in which Err70 may occur when repeatedly shooting in the "High-speed continuous shooting +" mode.
9. Fixes an issue in which HDMI output may momentarily stop when [Screen Off] is activated in the Power Saving settings.
Changes in version 2.1.0:
1. Enables functions to be used without limitation in conjunction with the new Battery Pack LP-E6P.
This makes it possible to shoot at the same continuous shooting speed as when using LP-E6NH.
In-camera charging of LP-E6P is also supported.
2. Adds [Protect Images] and [Rating] during FTP Transfer.
3. The following issues have been fixed.
3-1. Fixes an issue, in which when Wi-Fi is disconnected, Err 70 occurs.
3-2. Fixes an issue, in which when shooting subjects that are smaller in the frame, the card access indicator blinks and operations can no longer be performed.
3-3. Fixes an issue, in which when performing shooting in high-speed continuous shooting + mode with the [Highlight Tone Priority] option set to [ON], focus may not be achieved when certain ISO speed settings are used.
Changes in version 2.0.0:
1. Enables servo zooming to be remotely controlled from EOS Utility or Camera Connect when Power Zoom Adapter PZ-E2/PZ-E2B is attached to a compatible lens.
2. Enables up to 2 TB to be used on CFexpress cards larger than 2 TB.
3. Fixes an issue that may cause the camera, in rare instances, to experience a delayed restart after the camera has gone into Auto Power Off.
4. Fixes an issue that, under specific circumstances, may prevent the image from being displayed in the viewfinder or on the screen causing the camera to stop operating, or Error Code 70 may be displayed.
5. Fixes minor issues.
Changes in version 1.9.0:
1. Adds the ability to erase voice memos added to images and to add voice memos to protected images.
2. Adds enhanced security when transferring images via FTPS transfer.
3. Adds support for the Software Development Assistance Kit (EDSDK/CCAPI).
4. Fixes an issue, in which, after touchscreen operation, in rare circumstances, the camera operations cannot be performed, and even if the camera is operated, [BUSY] appears on the screen.
5. Fixes minor issues.
Changes in version 1.8.1:
1. Adds [IBIS High resolution shot] to the camera menu. By utilizing the in-body IS mechanism, it is now possible to record images with higher resolution.*
*Use EOS Utility/Digital Photo Professional to check the images. EOS Utility/Digital Photo Professional will need to be upgraded.
2. Adds [Save/load comm. settings on card] to the camera menu.
Network settings can now be transferred between cameras of the same model.
3. Adds the ability for images to be cropped and resized during transfer to the FTP server.
4. Adds Protect Images During [FTP Transfer] to the camera menu. Images transferred via FTP can now be automatically protected. The user can determine if images have already been transferred via FTP.
5. Fixes minor issues.
To trochę nie w porządku z twojej strony korzystać ze starszego oprogramowania i jednocześnie narzekać.
Komentarz