magicie
02-02-2010, 02:01
witam mam maly dylemat zakupilem ta lampe i chcialem wgrac nowy firmware
niby banal instrukcja jest i powinno byc prosto.
1. Create an empty directory on the computer's hard disk (e.g., C:\Metz\MB58AF1 Nikon\).
2. Copy the self-extracting file, e.g. “58AF1 Nikon V2.0 GB.exe”, to the directory and execute it.
2.1 A WinZip Self-Extractor window opens up. To unpack the file, select the newly created empty directory
((e.g., C:\Metz\MB58AF1 Nikon\) and click "UNZIP".
2.2 After the files are unpacked, close the WinZip Self-Extractor window.
3.0 Switch off the flash unit and remove the batteries.
3.1 Use a standard mini-USB cable to connect the flash unit to the PC.
3.2 The hardware detection of the computer asks for the USB driver needed for the newly detected device.
i tu u mnie zaczely sie schody komputer nie wykrywa urzadzenia (sprawdzalem na 3 roznych) powinien sie wysfietlic"Found new hardware wizard" I DALEJ JAK W INSTRUKCJI
jakies sugestie poprosze
niby banal instrukcja jest i powinno byc prosto.
1. Create an empty directory on the computer's hard disk (e.g., C:\Metz\MB58AF1 Nikon\).
2. Copy the self-extracting file, e.g. “58AF1 Nikon V2.0 GB.exe”, to the directory and execute it.
2.1 A WinZip Self-Extractor window opens up. To unpack the file, select the newly created empty directory
((e.g., C:\Metz\MB58AF1 Nikon\) and click "UNZIP".
2.2 After the files are unpacked, close the WinZip Self-Extractor window.
3.0 Switch off the flash unit and remove the batteries.
3.1 Use a standard mini-USB cable to connect the flash unit to the PC.
3.2 The hardware detection of the computer asks for the USB driver needed for the newly detected device.
i tu u mnie zaczely sie schody komputer nie wykrywa urzadzenia (sprawdzalem na 3 roznych) powinien sie wysfietlic"Found new hardware wizard" I DALEJ JAK W INSTRUKCJI
jakies sugestie poprosze