UnDutchables V0.2.3.

The Wasia firmware already contained:
- ISO 3200
- Mirror Lock up for Timer and Single shot
- Selectable pause for mirror lock up see C.Fn. 17
- FEC on JUMP button
- 'Left' button selects the autofocus mode:
AF OS - ONEShot
AF SE - AI-Servo
AF AI - AI-Focus
- the default button in delete prompt was changed from 'Cancel' to 'OK'. So, be aware.
Now if you want to delete an image, press DEL button and then SET once. To Cancel press any other key.

Added functionality by the UnDutchables
--------------------------------------------------
Continues Drive in Basic Mode
Jump = FEC only selectable in Creative modes
Right key = AF-Mode only selectable in Creative modes
Left key toggles AF (off-on), can be used to shoot in AI Servo mode
WB selection in Basic modes
Custom Function 1 available in basic modes enabling:
- Quality Select via SET button, this means that RAW can be set in basic modes.
- Parameter select via SET buttons
- Menu via SET button
- Image Replay via SET button
Full menu's in Basic modes, including WB bracketing and RAW quality.
Full info screen in Basic mode

Notes:
) If the AF drive is set to AI-Servo the AF confirmation Ligh and Beep are turned off (as done in the 10D) but now it is turned off for all ALL modes. Please change to AI-Focus or One-Shot if AF confirmation Light and Beep is desired.
2) You can upgrade this firmware from either the Canon 1.1.1, the Wasia B7.1 or UnDutchables 0.1.0 version without need to reset the firmware or the custom function values.