Cytat Zamieszczone przez Tomasz Golinski
Czy moglby mi ktos wytlumaczyc, czemu wartosc przeslony ma znaczenie dla powstawania paprochow? Doswiadczalnie zgadzam sie, ze tak jest, ale tego nie rozumiem. Przeciez przy samej matrycy juz tworzy sie obraz, a taki paproch tylko zaslania niektore piksele.
http://www.photo.net/equipment/digital/sensorcleaning/:
[center:f56ddc369b][/center:f56ddc369b]
"The dust isn't actually on the sensor surface. It's on the surface of a filter which is in front of the actual sensor itself. This is why dust shows up more at smaller apertures. Since the dust spots are some distance from the actual sensor pixels, a wide aperture lets in light which can "go around" the dust spot. It's a bit like using a large softbox for lighting. Shadows (and what shows up in the image is the shadow of the dust spot) are light and soft. At small apertures it's like using a small pinpoint spotlight and shadows are dark and hard edged."

Mnie to przekonuje

Cytat Zamieszczone przez Tomasz Golinski
Czy chodzi tu np. o kąt padania światła? Osobiscie wątpie, bo wydawało mi się, że i tak musi być bardzo prostopadły?
Kąt jest zdecydowanie "nie bardzo" prostopadły. Odchylenie na brzegach to kilkanaście - dwadzieścia-kilka stopni. Wiekszość mechaniki w DSLR - obiektywy, odległości itp. jest wzięta żywcem z SLR, a tam nie ma tego problemu - kliszy te kilkanaście stopni nie robi żadnej różnicy.