ja mam UnDutchables 0.2.3 i jestem zadowolony...
Wersja do druku
ja mam UnDutchables 0.2.3 i jestem zadowolony...
Brakuej ISO na auto :P
No jasne, inicjatywa prawa! 2 lamelę rozwiazuje o ile dobrze pamietam 580 tka? Czyli wystarczy uruchomic funkcje z lampy. Nie wiem czy da sie kogoś namówic na zmiany w programie, nawet nie iem w czym on jest pisany, poza tym pewnie dużo dłubania. Ale w razie W jestem za!Cytat:
Zamieszczone przez gwozdzt
Cytat:
Zamieszczone przez bakerp
Znalazlem tutaj
http://forums.dpreview.com/forums/re...ssage=14738570
Cos takiego;
========================================
After having used some of them for about a year, here's my conclusion:
It's fun to have access to some extra features, but they can seriously screw up your camera at any moment.
I installed mine for FEC (had no 580EX back then), and for 2nd curtain flash (so I needed the custom functions unlocked). Worked fine for quite a long time. I kept on upgrading until the last "Wasia" fimware (the one where AI servo was selectable but the shutter button would not fire).
But then, while on holiday, the camera all-of-a-sudden refused to fire a shot in Av/Tv/M/A-dep. All the other modes worked fine. Switching on off: no change. Batteries out & in; no change. I lost half a day looking for a solution. I did not have access to internet or even PC. Finally, the solution was; set it back to factory defaults. Whew...
About 2 months later I was shooting a wedding with my brother in law. All-of-a-sudden, all my flash pix were WAAAAY overexposed, again only in Av/Tv/M/A-dep modes. "Way overexposed" as in; almost 100% white! Luckily my brother in law brought a spare 10D for me to use, as this time NOTHING helped, not even a reset to default. I'm gonna have to install another firmware to get rid of the overexposed flash pix.
My camera may have had smaller hickups that passed by unseen (what's a couple of bad shots in a full CF right?), but the two events above stand out. 2 times I was let down by my cam, both at important moments.
To me it is fairly obvious; only the firmware can be at fault here. Fiddling around with software that you did not write, decompiling the exe etc... not that easy I guess. Wel... I never tried those "Undutcheable" hacks, so I don't know about those. Those may be better.
Anyway, conclusion to me is; if you're using your cam for serious stuff; don't take any chances. Put an original firmware on, and learn to work with the shortcomings of the cam. And if that's really not an option; upgrade. I'm switching to 20D soon.
--
Ciao,
J.
========================================
W zaleznosci od potrzeb - moze i ten tekst w czyms Ci pomoze,
w linku ktory podalem wyzej znajdziesz tez wiecej wypowiedzi.
Pozdrawiam,
Parteq
Witam,
powiedzcie poproszę jak wgrać ten hack na moją 300d ? nigdy wcześniej tego nie robiłem!!!!!!:oops:
mam tylko kabel który był w zestawie!!!!! wystarczy????
z góry dziękuję za informację!!!!!
Jeśli jesteś jeszcze zielony, to wygospodaruj czas, przeczytaj cały wątek http://canon-board.info/showthread.php?t=417
To powinno rozwiać wszelkie wątpliwości.
Dziękuję Tomku !!!
Jeżeli dobrze wyczytałem to nie mam szans wgrać tego nowego softu na aparat bez czytnik akart?? :-(
Nie wiem czy dobrze Cię rozumiem? Pytasz czy możesz skopiwać soft na kartę bez czytnika? Jeśli tak to możesz. Przełączasz aparat w menu w pozycji Connection na PTP, podłączasz aparat do kompa, kopiujesz soft na kartę. Odłączasz aparat od kompa. Włączasz aparat i postępujesz dalej zgodnie z instrukcją upgrade'u softu...Cytat:
Zamieszczone przez luccass
Źle wyczytałeś: http://www.canon.co.jp/Imaging/eosdi...irmware-e.htmlCytat:
Zamieszczone przez luccass