crater
20-11-2009, 23:57
Otoz dostalem od znajomego spydera 2 w wersji express.
Wszystko fajnie pieknie ale mam problem z profilami w Viscie (32 bit)
Posiadam laptopa Toshibe Satelite A300 - 20F oraz ekran LG Flatron L1730S.
zainstalowalem zgodnie z instrukcja program do kalibracji.Program zrobil sobie jaks base profile. Zresetowałem system i pokazal mi sie taki oto komunikat:
https://canon-board.info//brak.gif
źródło (http://img405.imageshack.us/img405/2363/35041380.jpg)
Napisalem na support Datacolor i po kilku wymienionych mailach otrzymalem informacje:
this sometimes happen if the software can not attach the profile to the monitor, mainly due to a missing or invalid display driver.
Please activate your new profile manually with the following steps:
-please click with the right mouse button on a free area of your desktop
-choose "Personalize"
-click on "Display settings"
-now in the lower right side "Advanced Settings"
-click on "Color Management" and choose the "Color Management" tab
-activate the option "Use my settings for this device"
-click on "Add..." and select your new self created Spyder profile
-please click on "Set as default profile" and then on the "Close" button
Now restart your pc and the created profile will be loaded automatically.
Wiec zrobilem jak pisali.
https://canon-board.info//brak.gif
źródło (http://img233.imageshack.us/img233/5003/26543414.jpg)
No i lipton. Znow do nich napisalem i dostalem linka do wersji Spyder 2 Pro 2.3.5. Odinstalowalem poprzedni i zainstalowalem nowa wersje. Ciagle to samo. Teraz po odpaleniu program krzyczy zeby wybrac inny profil kolorw. Wchodze wiec w Profile Chooser i odrazu wyskakuja mi bledy:
https://canon-board.info//brak.gif
źródło (http://img137.imageshack.us/img137/4418/86265749.jpg)
https://canon-board.info//brak.gif
źródło (http://img405.imageshack.us/img405/4418/85704012.jpg)
Zainstalowlem sterowniki ekranu LG(ten chce skalibrowac).
Niestety przy wybieraniu innych profili ciagle krzyczy mi bledy:
https://canon-board.info//brak.gif
źródło (http://img101.imageshack.us/img101/2417/88548792.jpg)
albo
https://canon-board.info//brak.gif
źródło (http://img524.imageshack.us/img524/7103/27950467.jpg)
Nie wiem powoli zaczynam zalowac ze sie za to wziolem. Moze cos robie nie tak. Czy ktos mogly mi powiedziec jak przeprowadzic proces instalacji i klaibracji pod Vista za pomoca Spydera 2
Wszystko fajnie pieknie ale mam problem z profilami w Viscie (32 bit)
Posiadam laptopa Toshibe Satelite A300 - 20F oraz ekran LG Flatron L1730S.
zainstalowalem zgodnie z instrukcja program do kalibracji.Program zrobil sobie jaks base profile. Zresetowałem system i pokazal mi sie taki oto komunikat:
https://canon-board.info//brak.gif
źródło (http://img405.imageshack.us/img405/2363/35041380.jpg)
Napisalem na support Datacolor i po kilku wymienionych mailach otrzymalem informacje:
this sometimes happen if the software can not attach the profile to the monitor, mainly due to a missing or invalid display driver.
Please activate your new profile manually with the following steps:
-please click with the right mouse button on a free area of your desktop
-choose "Personalize"
-click on "Display settings"
-now in the lower right side "Advanced Settings"
-click on "Color Management" and choose the "Color Management" tab
-activate the option "Use my settings for this device"
-click on "Add..." and select your new self created Spyder profile
-please click on "Set as default profile" and then on the "Close" button
Now restart your pc and the created profile will be loaded automatically.
Wiec zrobilem jak pisali.
https://canon-board.info//brak.gif
źródło (http://img233.imageshack.us/img233/5003/26543414.jpg)
No i lipton. Znow do nich napisalem i dostalem linka do wersji Spyder 2 Pro 2.3.5. Odinstalowalem poprzedni i zainstalowalem nowa wersje. Ciagle to samo. Teraz po odpaleniu program krzyczy zeby wybrac inny profil kolorw. Wchodze wiec w Profile Chooser i odrazu wyskakuja mi bledy:
https://canon-board.info//brak.gif
źródło (http://img137.imageshack.us/img137/4418/86265749.jpg)
https://canon-board.info//brak.gif
źródło (http://img405.imageshack.us/img405/4418/85704012.jpg)
Zainstalowlem sterowniki ekranu LG(ten chce skalibrowac).
Niestety przy wybieraniu innych profili ciagle krzyczy mi bledy:
https://canon-board.info//brak.gif
źródło (http://img101.imageshack.us/img101/2417/88548792.jpg)
albo
https://canon-board.info//brak.gif
źródło (http://img524.imageshack.us/img524/7103/27950467.jpg)
Nie wiem powoli zaczynam zalowac ze sie za to wziolem. Moze cos robie nie tak. Czy ktos mogly mi powiedziec jak przeprowadzic proces instalacji i klaibracji pod Vista za pomoca Spydera 2